楊君新たにSIEMENS Sizing機械にエラーが出ます。運転停止時

楊君


新たにSIEMENS Sizing機械にエラーが出ます。
運転停止時に停止ボタンを押した時機械は正常に止まりますが、アラームが鳴り画面に写真の表示が出ます。
アラーム音は、停止ボタンで止まり、運転再開できる場合画面のクリアーが必要です。
運転再開できない場合、インバーター１番にF-082が出ます。
インバーターをリセットすれば運転が出来ます。
PLC(CPU基盤）は交換して見ましたが同じです。
何が悪いのか聞いてください。

Results (English) 1:

YEUNGNew SIEMENS Sizing machine get error.Machine stops successfully when you press Stop button to stop driving, but alarm sound screen makes viewing photos.If the alarm is stopped with the stop button and you can resume screen clearing is required.Cannot operate if the inverter first makes a F-082.If you reset the inverter driver.Saw the Exchange plc (CPU board) is the same.Ask what's wrong.

Results (English) 2:

楊君


will newly get an error in the SIEMENS Sizing machine.
Machine when you press the stop button at the time of shutdown will stop to normal, but makes a photo display on the screen alarm sounds.
Alarm sound, stopped at the stop button, you must have clear in the case screen operation can resume.
If you can not resume operation, you get the F-082 to the inverter No. 1.
If reset the inverter can be operated.
PLC (CPU-based) are the same, but saw to replace.
Please ask you what's wrong.

Results (English) 3:

Mr. YangIn the new SIEMENS Sizing mechanical error.When the operation is stopped when the press the stop button to stop the machine, the alarm is displayed on the picture screen.The alarm sound, stop at the stop button, the screen in the case where a clear need to restart the operation.If you can"t resume operation, when the inverter 1 F.You can reset operation of the inverter.On the basis PLC CPU) see the exchange was the same.Ask what is bad.